Brake controls by REESE ® are 100% solid-state electronics designed for use with two to eight brake systems. These units meet all national highway traffic safety administration regulations regarding tow vehicle/trailer stoplight activation. Its ease of operation and innovative design features make it the perfect choice for today’s towing vehicles.

On the REESE Brakeman brake controls, an output control is located on the front of the unit for easy adjustment. The Brakeman-Compact uses a slide adjustment. The Brakeman-Digital has a thumb-wheel adjustment. The Brakeman-Compact

has a red indicator light on the front of the unit which illuminates when the brakes are applied. The Brakeman-Digital has a digital display on the front of the unit which indicates the output and "sync" setting when a trailer is connected and trailer brakes are applied. In the case of an overload, caused by either a short or low power supply, the Brakeman-Digital will display an overload warning. Both REESE Brakeman brake controls are covered by additional circuit protection. They will not be damaged if the black and white wires are reversed and they will also not be damaged in the event of a short, if no ground or a poor ground exists. To compensate for trailer load changes and driver preferences, adjustments can be made by using the slide control located on the side of the unit. The driver can control the rate of brake application from soft to aggressive by simply moving this control forward or backward. Since the unit has no moving parts or pendulums to adjust, it can be mounted in virtually any position. Mounting bracket and hardware are included. Its slim design and contoured shape are combined to provide more under-dash clearance than most brake controls on the market today. Trailer brakes may be manually applied by squeezing the manual control, located on the front of both units. This control also triggers the trailer and tow vehicle’s stop lights when brakes are applied.

Brakeman ^TM Digital

Pt. #74643

Patent Pending 

Brake Control Adapter Harness

Pt. #74464

Patent Pending 

Features:

• 2, 4, 6 & 8 Brake Systems

• Digital Output Indicator

• Overload Indicator

• No Moving Parts

• Completely Compatible w/ Anti-Lock Braking System

• No Leveling Required

• Retail Packaged

• Full Lifetime Warranty

Brakeman ^TM Compact

Pt. #74642

Patent Pending 

Features:

• 2 & 4 Brake Systems

• Completely Compatible w/ Anti-Lock Braking Systems

• No Leveling Required

• No Moving Parts

• Retail Packaged

• 3 Year Limited Warranty

Universal

Brake Control

Wire Kit

Pt. # 74202

Patent Pending 

Consists of:

1) 30 Amp Circuit Breaker

1) 20 Amp Circuit Breaker

2) #10 Terminal Rings

2) 1/2" Terminal Rings

2) 3/8" Terminal Rings

3) Butt Connector

8) Cable Ties

10 Ft. of 10 Gauge Wire (blk/wht)

20 Ft. of 10 Gauge Wire (blk/wht)